send Message

Invisibility? Click and replace
Home  /  Application
  • BIOGAS CONVEYING
    BIOGAS CONVEYING
    The working principle: The side channel blower will be used for vacuum conveying or discharge conveying the biogas or other explosion gas;
    Dereike Explosion proof blower features:
     
    Special designed according to customer technical required;
    Color available: Gold, Silver, Grey or any others( Panton No. provided );
    Voltage range: 3AC 220V ,3AC 380V,3AC 220/380V,3AC 660V,3AC 380/660V;
    Motor working mode: Ordinary, Frequency conversion;
    Available Motor brand: Nanyang Weite, Siemens,Jiamusi,ABB,Nanyang Wolong,
    or Customer provided motor;
    Anticorrosion treatment: Inner surface anticorrosion treatment, Outer surface anticorrosion treatment, Both Inner and outer surface anticorrosion treatment;
    Ex Standard: ExdIIBT4 Gb,ExdIICT4 Gb, EX td B20 T130℃,EX td B21 T130℃ ,EX td B20 T130℃;
     
    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
     
    Type of the gas:□ methane □ air □ natural gas □ steam gas  □others        
     
    Type of conveying: □vacuum   □discharge
    □vacuum & discharge    □cycle
     
    Total distance of gas conveying          m
     
    Inner diameter of the main pipe          mm
    Qty of the elbow        piece
     
    Type of gas conveying control: □ordinary boot   □ top and bottom limination
    □frequency conversion constant   □constant negative pressure protection
     
    The air flow demands            m3/h
     
    Requested pressure          KPa ;Requested vacuum         KPa
     
    Model of old blower used (brand)                
                  
    Voltage:  □ Single phase 220V □ 3 phase 220V   
    □3 phase 380V       □ others:        
    Frequency  range :                  
    Temperature of sucked air            to            ℃ 
    Ambient temperature             to            ℃ 
    Altitude of working place                  m

    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • PNEUMATIC CONVEYING
    PNEUMATIC CONVEYING
    The working principle: The side channel blower will be used for vacuum conveying or discharge conveying the raw material.
     
    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
     
    The Name of your equipment:                                               
    Blower used functions:
    □ Vacuum   
    □ Discharge
      
    Old Blower Type used:
    □ Roots Blower
    □ High-pressure Blower
    □ Centrifugal Blower 
    □ Medium-pressure Blower
    □ Rotary Vane Vacuum Pump   
    □ Rotary Blower  
    □ Water Ring Vacuum Pump   
    □ Others________
     
    Old blower used Model(brand) : _________________
     
    Suitable Voltage Specification:   
    □ 1- Phase 220V □ 3-Phase 220V
    □ 3- Phase 380V □ Other______
     
    Requested Airflow                m3/h
     
    Requested Pressure        mbar;
    Or Requested Vacuum           mbar
    The temperature of the air               ℃ 
    Ambient temperature of blower                ℃ 
    Spot altitude        m
    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • INDUSTRIAL VACUUM CLEANER
    INDUSTRIAL VACUUM CLEANER
    The working principle: The Medium pressure blowers are used for industrial vacuum cleaning.
     
    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
     
    The Name of your equipment:                                               
    Blower used functions:
    □ Vacuum   
    □ Discharge
      
    Old Blower Type used:
    □ Roots Blower
    □ High-pressure Blower
    □ Centrifugal Blower 
    □ Medium-pressure Blower
    □ Rotary Vane Vacuum Pump   
    □ Rotary Blower  
    □ Water Ring Vacuum Pump   
    □ Others________
     
    Old blower used Model(brand) : _________________
     
    Suitable Voltage Specification:   
    □ 1- Phase 220V □ 3-Phase 220V
    □ 3- Phase 380V □ Other______
     
    Requested Airflow                m3/h
     
    Requested Pressure        mbar;
    Or Requested Vacuum           mbar
    The temperature of the air               ℃ 
    Ambient temperature of blower                ℃ 
    Spot altitude        m
    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • WELDING FUME EXTRACTION
    WELDING FUME EXTRACTION
    The working principle: The side channel blower will be used for vacuum conveying the gas and doing the gas analyze.
     
    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
     
    The Name of your equipment:                                               
    Blower used functions:
    □ Vacuum   
    □ Discharge  
     
    Old Blower Type used:
    □ Roots Blower
    □ High-pressure Blower
    □ Centrifugal Blower 
    □ Medium-pressure Blower
    □ Rotary Vane Vacuum Pump   
    □ Rotary Blower  
    □ Water Ring Vacuum Pump   
    □ Others________
     
    Old blower used Model(brand) : _________________
     
    Suitable Voltage Specification:   □ 1- Phase 220V □ 3-Phase 220V
    □ 3- Phase 380V □ Other______
     
    Requested Airflow                m3/h
     
    Requested Pressure        mbar;
    Or Requested Vacuum           mbar
    The temperature of the air               ℃ 
    Ambient temperature of blower                ℃ 
    Spot altitude        m
    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • ADSORPTION DRYER
    ADSORPTION DRYER
    The working principle: The side channel blower will be used for vacuum conveying or discharge conveying the raw material.
     
    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
     
    The Name of your equipment:                                               
    Blower used functions:
    □ Vacuum  
    □ Discharge   

    Old Blower Type used:
    □ Roots Blower □ High-pressure Blower
    □ Centrifugal Blower □ Medium-pressure Blower
    □ Rotary Vane Vacuum Pump   
    □ Rotary Blower  
    □ Water Ring Vacuum Pump   
    □ Others________
     
    Old blower used Model(brand) : _________________
     
    Suitable Voltage Specification:   
    □ 1- Phase 220V
    □ 3-Phase 220V
    □ 3- Phase 380V
    □ Other______
     
    Requested Airflow                m3/h
     
    Requested Pressure        mbar;
    Or Requested Vacuum           mbar
    The temperature of the air               ℃ 
    Ambient temperature of blower                ℃ 
    Spot altitude        m

    Star: Plastic Wood
    Application: Dereike side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • CENTRAL FEEDING
    CENTRAL FEEDING
    The central feeding system adopts vacuum transmission mode, through the centralized pipeline system, the plastic raw materials are transported from the storage tank to the central dehumidification and drying system, and then the dried raw materials are transported to each injection molding machine.The central feeding system adopts the design method of "one machine one pipe" to ensure the air of the whole system to convey raw materials and prevent the moisture regain after dehumidification and drying.At the same time in each operation is stable, no blockage phenomenon occurs.It is used in combination with the central dehumidification and drying system, which can clean the conveying pipeline after the dehumidification and drying feeding cycle to ensure that there are no residual particles in the pipeline, so as to avoid the moisture regain of raw materials and ensure the consistent performance of raw materials in the injection molding machine.Under the action of vacuum negative pressure, the original dust in the raw material will be filtered out through the dust filtration system, which is helpful to improve the quality of molding products.
    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • ELECTROPLATING
    ELECTROPLATING

    Electroplating aeration
    The working principle:
    The blower in Electroplating, also known as aeration blower, is a kind of aeration equipment that releases tiny bubbles by compressed air in the aeration device arranged , and then carries on mass transfer with liquid
    during the rising process of these bubbles, so that oxygen can be dissolved slowly into the liquid, so that articles can be electroplated perfectly;
    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
     
    Area of electroplating processing pond:       m2 
    or length    m* width        m *height    m
     
    Depth of pond water height      m
     
    The height from Aeration pipe to the surface of the water      m
     
    The proportion of the Electroplating solution           
     
    Type of electroplate: □ coppering  
    □ galvanizing  □ nickeling 
    □  chroming □ gold-plating 
    □ water scrubbing
    The total number of plating tank      piece;
    Planed      sets blower for the application;
     
    The model of the old blower (brand)                         
     
    Requested pressure          KPa ;
    Requested airflow           m3/h;
     
    Installment Ambient:
    □ along the electroplating pool   
    □ in the shelter of the electroplating wire   
    □ outside the room
     
    Plating stirring performance requirements:
    □ domestic standard  
    □ Taiwan standard  
    □ foreign standard
     
    Power & Voltage specification:
    □ single phase 220V  
    □ 3 phase 220V   
    □ 3 phase 380V 
    □ others        
     
    Temperature of the air       to          ℃ 
    Ambient temperature from        to         ℃ 
    Spot altitude        m

    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • CNC ENGRAVING MACHINE
    CNC ENGRAVING MACHINE

    The working principle:
    The side channel blower plays the role of vacuum holding of the material in the CNC Engraving Machine,  blowers are used for vacuum suction;

    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
    Material:
    □ leather
    □ paper sheet
    □ cloth
    □ wood board
    □ plastic film
    □ glass □ others        

    Surface of the material :
    □ smooth
    □ irregularity
    □ deformable
    □ not deformable

    Size of the material: length     width     height(thickness)     mm
    Vacuum table area: length         width        height          mm
     
    Actual working vacuum table area: length     width    length    mm
     
    Volume of the vacuum desk system      m3 
     Length       width        height        mm
     
    Total vacuum hole qty    piece; diameter of vacuum hole     mm
     
    Model of Old blower(brand)used                         
     
    Requested pressure        KPa ;Requested air flow       m3/h
    Power & voltage:□ 220V 1 phase   □ 220V  3phase
    □ 380V  3 phase  □ others       
    Temperature  of the sucked air            to            ℃ 
    The ambient temperature             to            ℃ 
     
    Altitude of working place                 m
     
    Please also send us the drawing of the vacuum table if possible:

    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • AQUACULTURE
    AQUACULTURE
    The working principle:
    The blower in aquaculture, also known as aeration blower, is a kind of aeration equipment that releases tiny bubbles by compressed air in the aeration device arranged in aquaculture water, and then carries on mass transfer with water during the rising process of these bubbles, so that oxygen can be dissolved slowly into the water, so as to improve water quality.
    At present, there are three commonly used blowers on the market: rotary blower, water ring blower, and the side channel blower;
    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
     
    Type of aquaculture:
    □ Industrial aquaculture 
    □ fish pond aquaculture
    □ cage aquaculture on sea
    □ ornamental aquaculture □ others       

    Species:
    □ penaeus monodon
    □ crucian 
    □ turbot
    □ steamed crab
    □ Integrated
    □ others        

    Type of aquaculture pond:
    □ cement-pit  
    □ mariculture
    □ bog pond

    Type of aeration:
    □ PVC punching
    □ microvoid aerated pipe     
    □  aerated plate
    □ aeration stone
    □others        
     
    The density of aquaculture         qty/per hectares or     qty/m2
     
    Pond area         m2. Or length        width        height       m
     
    The qty of ponds          . ; a blower used for        ponds
     
    The height between the water surface and aerator           m
    Total length of aeration pipe      m; One meter of aeration pipe needs air flow        m3/h
    The pressure loss of aeration pipe(aerator)             KPa
    The model of old blower used (brand)                        
     
    Requested pressure       KPa ;Requested air flow         m3/h
     
    Power & voltage:
    □ 1phase 220V  
    □ 3phase 220V
    □ 3phase 380V   
    □ others       
     
    Altitude of working place             m
    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • PRINTING EQUIPMENT
    PRINTING EQUIPMENT
    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
     
    Surface of the material : □ smooth □ irregularity
                        □ deformable □ not deformable
    Size of the material: length     width     height(thickness)     mm
     
    Vacuum table area: length         width        height          mm
     
    Actual working vacuum table area: length     width    length    mm
     
    Volume of the vacuum desk system      m3 
     
     Length       width        height        mm
     
    Total vacuum hole qty    piece; diameter of vacuum hole     mm
     
    Model of Old blower(brand)used                         
     
    Requested pressure        KPa ;Requested air flow       m3/h
    Power & voltage:
    □ 220V 1 phase   
    □ 220V  3phase
    □ 380V  3 phase  
    □ others       
     
    Temperature  of the sucked air            to            ℃ 
    The ambient temperature             to            ℃ 
     
    Altitude of working place                 m
     
    Please also send us the drawing of the vacuum table if possible:
    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application
  • SEWAGE TREATMENT
    SEWAGE TREATMENT
    The working principle:
    In sewage treatment plants, fans are mainly used for ventilation of sewage treatment structures, pre-aeration in wastewater treatment stage, blown aeration in aerobic biochemical treatment, mixing and stirring, etc.
    In sewage treatment, the main blowers are: Roots blower, side channel blower, multi-stage centrifugal blower;
     
    Please try to fill the questions below, so that we can analyze and select suitable model to you accordingly:
     
    Sewage Type:
     
    □ Industrial sewage 
    □ Sanitary sewage 
    □ Buried sewage
    □ Chemical sewage 
    □Marine sewage
     
    Aeration Methods:
    □ aeration disk  
    □ micro aeration pipe 
    □ PVC perforated
    □ aerator 
    □ others    
     
    Area of the sewage Treatment    m2 or length     width    height     m
     
    The depth from the aeration to the surface of the water       m
     
    Proportion of the Sewage     ;
    The numbers of the blasting aeration  pool      
     
    The capacity of the sewage Treatment system       ton/day;
    _________working hours/day
     
    Diameter of the aeration disk     mm;
    qty of the aeration disk       pieces
     
    Length of the aeration pipe        m
     
    Model of the old  blower used (brand)                
     
    Requested  pressure        KPa ;Requested airflow         m3/h
     
    Voltage specification:
    □ single phase 220V  
    □ 3 phase 220V  
    □ 3 phase 380V 
    □others       
     
    Temperature of sucked air            to            ℃ 
    Ambient temperature             to            ℃ 
     
    Altitude of working place                  m
    Star: Plastic Wood
    Application: JIEMING side channel blower has been widely used for Vacuum ( Sunction ) and Pressure ( Discharge) in more than 35 different industrials and application